🎓 Education

CGPA to Percentage Calculator

Enter your CGPA on the ten-point scale and press Calculate to get the percentage equivalent. For example, 8 CGPA in percentage is 76% under the 9.5 rule, get the percentage equivalent using the widely used × 9.5 convention.

Built by the UnitCalConv team · Last reviewed · Report an error

For example 8.2. Use the university pages below if your institution publishes a different formula.

About the CGPA to Percentage Calculator

There is no single national CGPA to percentage formula. The most common convention on a ten-point scale is percentage = CGPA × 9.5, popularised by several Indian universities and repeated in most online converters. It is a convention, not a law: VTU and AKTU subtract 0.75 before multiplying by 10, Anna University subtracts 0.5, and Mumbai University uses a linear fit of its own.

That matters because the answers differ. A CGPA of 8.0 becomes 76% with the 9.5 rule, 72.5% under the VTU and AKTU formulas, and 75% under Anna University's. When a form asks for a percentage, use the formula printed on your own transcript rather than a generic converter — including this one.

How the calculation works

  • 10-point scale, common convention: percentage = CGPA × 9.5
  • VTU / AKTU: percentage = (CGPA − 0.75) × 10
  • Anna University: percentage = (CGPA − 0.5) × 10
  • 4-point scale: percentage = CGPA ÷ 4 × 100

Reference values

CGPA converted to percentage with the 9.5 multiplier
CGPA (10-point)Percentage at × 9.5
6.057.0%
6.561.75%
7.066.5%
7.571.25%
8.076.0%
8.580.75%
9.085.5%
9.590.25%
10.095.0%

Worked examples

  • 6.0 = 57.0%.
  • 6.5 = 61.75%.
  • 7.0 = 66.5%.
  • 7.5 = 71.25%.
  • 8.0 = 76.0%.

Checking the answer

Check one row of the CGPA (10-point) chart by hand. A difference of a whole step (10 or 100) means a decimal point moved; a difference in the last digit is just rounding. The first row, 6.0 to 57.0%, is the one worth memorising because it anchors every other figure in the table.

Common mistakes

  • Using a rounded factor for a large quantity, where the error multiplies.
  • Rounding at the start of a calculation rather than at the end.
  • Assuming two similarly named units are the same size.

Using this conversion

CGPA (10-point) and Percentage at × 9.5 do not share a single multiplier, so the chart is the reference rather than the arithmetic. Reading the nearest row and adjusting from it is faster and less error-prone than rebuilding the formula each time, especially on a phone at a counter or a site office.

When precision matters

Where a CGPA (10-point) figure is used for a specification or a payment, take the value from the converter rather than from a rounded Percentage at × 9.5 row, and note which convention was used so the other party can check it the same way.

A last check on the CGPA (10-point) table: 6.0 57.0% sits at the base of the chart, and the rows above it step in the same proportion, so you can scale from that first row instead of reading every line. If a figure you were quoted falls between two rows, it is the Percentage at × 9.5 side that has been rounded, not the conversion itself.

Frequently asked questions

On a ten-point scale the common convention is CGPA × 9.5. Many universities publish a different rule, such as (CGPA − 0.75) × 10 at VTU and AKTU.
8 × 9.5 = 76%. Under the VTU formula it is (8 − 0.75) × 10 = 72.5%.
National University (Bangladesh) publishes its own conversion table for each programme, so use the figure printed on your transcript. The 9.5 multiplier is an Indian ten-point convention, not the NU rule.
BTEB diploma results follow the board's own conversion table rather than a 9.5 multiplier. Ask your institute for the official mapping, or use the percentage already printed on the certificate.
It is a convention, not an exact conversion, and it can be off by several percentage points. Treat it as an estimate unless your institution endorses it.

Related tools